StangerSite © 2008 All pictures, diagrams, text and illustrations are the property of StangersSite and may not be copied or reproduced without the express written permission of the Webmaster |
REBUILDING KITS and PARTS |
Ford Non-Integral Steering Box Parts & Rebuild Kits |
These are the finest steering box rebuild kits on the market today., They contain
all the available replacement parts needed to renew your rebuildable steering
box core. The parts are all good quality pieces and have been used in hundreds
or successful rebuilds. Kits include both upper and lower Sector Shaft Needle Bearings, upper and lower Input Shaft/Worm Gear Bearings and Races, Sector Shaft Lower Seal, Top Plate gasket and Housing Bearing Plug. What makes this kit superior to all the rest, is the comprehensive iillustrated instructions. A full eight pages of pictures and text, explaining removal, teardown, cleaning, inspection, reassembly and adjustment. These instructions were compiled by a professional rebuilder and are more complete than any magazine article or manual, including the original Ford shop manuals. |
The instructions are written with the home mechanic in mind and take into account
that these steering boxes are 25 to 45 years old and have certain common characteristics
and problems. |
To determine which kit you need, measure the diameter of the sector shaft above the
pitman arm splines or go HERE to decode the ID tag on the top of the box. |
SS-1616-K |
Rebuild kit for boxes with 1.0 inch diameter sector shafts (Typically 1965 to early 1967 Mustangs) |
SS-1816-K |
Rebuild kit for boxes with 1 1/8 inch diameter sector shafts (Typically late 1967 to 1970 Mustangs) |
$ |
69. |
95 |
plus $4.95 Priority Mail shipping |
Prices Effective March 2009 |
Steering Box Lubricant - A cartridge of good Lithium-based grease to do one box .............................................. Sector Shaft Nut & Lockwasher - Reconditioned nut & washer to retain sector shaft (specify shaft diameter) ...... Sector Shaft Adjustment Shim - To replace damaged or worn shim (specify shim number) .................................. Adjustment Nut Locking Ring - Reconditioned, to replace damaged lock rings .................................................... Steering Box Housing - Reconditioned, to replace damaged housing or broken bolt tabs ...................................... |
$ 2.50 $ 4.00 $ 2.00 $ 5.00 $ 25.00 |
STEERING BOX PARTS |
NOTE for 1960-1963 Falcons: The original steering boxes used in most 1960-1963 Falcons used bronze bushings
for the sector shaft before upgrading to needle bearings. New replacement bushings
are no longer available and later style needle bearings will not fit in their
place. It is recommended that these early bushed housings be replaced with a
later style housing so that needle bearings can be installed for a better quality
rebuild. The housings are not exactly identical, but they are very close. The
mounting hole locations are the same and all other internal and external pieces
will interchange. |
ID Tags - We have a selection of good used steering box ID tags, mostly for Mustangs.
If your box is missing ....... the ID tag, it is damaged or you are looking for a tag with a certain assembly date code, we might be able to help. Let us know what you are looking for and we will check to see what is available Sorry, no HCC-AX tags available. |
$ 8.00 |